Access control systems (ACS)
Catalog
Access control systems (ACS)
-
Operating frequency/Standards: 13.56 MHz: ISO14443A types A & B, ISO18092
-
Reading distances: Up to 8 cm / 3.15'' with a MIFARE® DESFire® EV2 or Classic card
-
Power requirement / Power supply: 130 mA/12 VDC max / 7 to 28 VDC
-
Protection / Resistance: IP65 Level excluding connector - Weather-resistant with waterproof electronics compliant with CEI NF EN 61086 standard Reinforced vandal-proof structure IK10 certified
more info >
-
One door IP controller (entry and exit)
-
3 types of interfaces, Wiegand, RS-485 and TCP/IP, supporting 2 readers for each interface
-
4 digital inputs for door contact, exit button, fire contact and tamper contact
-
4 relay outputs for lock, alarm, 2 LED for an access granted and access denied
-
DC 12V, 3A / PoE+ (IEEE 802.3at)
-
Suitable for door, parking lot and elevator controls
-
Stores up to 100,000 cards
-
ONVIF (Profile C) conformant
more info >
-
13.56 MHz integrated reader (Mifare DESFire, Mifare Plus and Mifare Classic)
-
Card access plus face recognition
-
RS-485 and network interface for connecting up to 2 readers
-
Switching access control modes in accordance with the authentication schedule: Card read-only mode (default), card and face recognition mode
-
1 door (control from one or two sides)
-
Call button (touch panel) for talk mode
-
Real-time image acquisition and image capture upon presentation of the card
-
Single card prohibition function
-
2 inputs, dry contact (door sensor / exit button)
-
1 relay output (30 V DC, 0.5 A)
more info >
-
One-way control: 8 doors
-
Two-way control: 4 doors with Wiegand only, 8 doors with Wiegand, RS-485 and network connection
-
8 Wiegand 26-64 bit card readers
-
16 GV-Reader and GV-GF fingerprint readers via RS-485 and network
-
Built-in 16 digital inputs and 24 relay outputs
-
Suitable for controlling doors, parking barriers, as well as access control to the elevator call buttons.
-
Hacking alarm function support
more info >
-
One-way and two-way control of 4 doors
-
8 Wiegand 26-64 bit card readers
-
8 GV-Reader and GV-GF fingerprint readers via RS-485 and network
-
Built-in 16 digital inputs and 24 relay outputs
-
Suitable for controlling doors, parking barriers, as well as access control to the elevator call buttons.
-
Hacking alarm function support
more info >
-
1 door (control from one or two sides)
-
1,000 / 40,000 cards (offline / network mode)
-
Convenient keypad programming
-
Built-in 2 digital inputs and 1 relay output
-
1 network interface for connecting to the GV-ASManager and 2 TCP / IP readers
-
13.56 MHz integrated card reader
-
Built-in burglar alarm sensor
-
Sealed enclosure, IP66 degree of protection (for outdoor use)
-
Support prohibition of repeated passage on one card
more info >